You only need to apply a small amount — roughly the size of a grain of rice or a pea — onto the center of the integrated heat spreader. Install CPU cooler. Use light, top-down pressure to place the base-plate or waterblock of your cooler onto the CPU, and hold that pressure while attaching the cooler to the mounting mechanism.
How do I install a CPU cooler?
Install CPU cooler. Use light, top-down pressure to place the base-plate or waterblock of your cooler onto the CPU, and hold that pressure while attaching the cooler to the mounting mechanism.
How to apply thermal paste to a CPU cooler?
Every brand of thermal paste and CPU cooler is a little different, and knowing the particulars of yours before starting will help the process go smoother. Apply thermal paste onto the center of the CPU’s IHS. ( If you already have thermal paste pre-applied on your cooler, you can skip this step .)
How does a CPU cooler work?
CPU coolers usually use air or liquid to relocate the heat created by the operation of the CPU. Base-Plate - The metal base of an air-cooler that attaches to the IHS of the CPU. This design allows the transfer of heat through convection to the fins of the heat sink, where it can then be redistributed with a fan.
How do I know if my CPU cooler has been pre-applied?
To find out if you have pre-applied paste, check the bottom of the base plate or water block of your CPU cooler that attaches to the CPU. If the silver paste is already there, you don’t need to add any more during the installation process. A few things to keep in mind before starting:
How do you use an Intel cooler?
over ambient. To mount the Intel stock cooler properly, place the motherboard on top of the foam or cardboard backing that was packed with the motherboard. The stock cooler will come with paste pre applied, it looks like three grey strips. and pulled up as far as they can go.
Do you need thermal paste for Intel stock cooler?
Every CPU cooler needs thermal paste, but many have it pre-applied, which simplifies the installation process. To find out if you have pre-applied paste, check the bottom of the base plate or water block of your CPU cooler that attaches to the CPU.
How do I replace my Intel CPU cooler?
0:213:35Intel CPU Fan Removal/Install - YouTubeYouTubeStart of suggested clipEnd of suggested clipAny cables that are attached to it there should be either one or two depending on what kind of fan.MoreAny cables that are attached to it there should be either one or two depending on what kind of fan. And then you unscrew the four screws now on a Intel motherboard depending.
Where do you plug in stock cooler?
CPU cooling fans should ALWAYS be plugged into the header that is specifically labeled “CPU Fan” and not “CPU Optional” or any other header. Sometimes these headers are white, but this is not always true.
Is Intel stock cooler good enough for gaming?
If you are talking about the stock coolers then yes, they are good enough for normal and gaming use if you don't mind the loud scream it makes when your cpu is at a higher load.
What is the best way to apply thermal paste?
One of the most common methods used is often referred to as the "line method." This is exactly as it sounds. Apply a thin line of thermal paste directly down the center of the IHS (Integrated Heat Spreader) and then allow the pressure of the CPU cooler to spread the paste as you secure it.
Can you replace CPU cooler without removing motherboard?
You should be able to install the cooler without removing motherboard. Cutout in the case allows accessing motherboard cpu area from both sides.
How do you change a stock CPU cooler?
3:029:36BEST Upgrade For A Stock CPU Cooler - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo once you've removed your bracket keep that to one side and keep your screws. Safe. And then justMoreSo once you've removed your bracket keep that to one side and keep your screws. Safe. And then just remove the other side here. Once you've removed. This you can now remove the back plate.
How do you remove Intel stock fans?
0:000:50How To Remove an Intel Heatsink and Fan - YouTubeYouTubeStart of suggested clipEnd of suggested clipEach has an arrow on the top rotate each pen 90 degrees in the direction of the arrow. Pull each ofMoreEach has an arrow on the top rotate each pen 90 degrees in the direction of the arrow. Pull each of the pins straight up and you should hear a click as they unlatch from the motherboard.
How do you attach a CPU cooler to a motherboard?
Installing CPU Heatsink & FanAttach fan to heat dissipater with screws, using spacers between.Attach fan/dissipater to chassis.Situate mounting ring according to diagram.Place special screw extenders into mounting ring.Apply thermal paste to the center of the CPU mounting position on the motherboard.More items...
How do I install a cooler on my PC?
Check for or apply thermal paste. Your CPU cooler doesn't go straight onto your CPU. ... (Optional) Set up any standoffs and/or install bracket behind the motherboard. ... Line up your CPU cooler. ... Attach the CPU cooler. ... Attach any fans.
How do I connect my CPU fan to my power supply?
0:532:23How to Connect Multiple Case Fans - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply plug in one of the fans to the 3 pin and of one of the adapters.MoreSimply plug in one of the fans to the 3 pin and of one of the adapters.
What is a CPU cooler?
CPU coolers usually use air or liquid to relocate the heat created by the operation of the CPU. Base-Plate - The metal base of an air-cooler that attaches to the IHS of the CPU. This design allows the transfer of heat through convection to the fins of the heat sink, where it can then be redistributed with a fan.
How to tell if CPU has silver paste?
To find out if you have pre-applied paste, check the bottom of the base plate or water block of your CPU cooler that attaches to the CPU. If the silver paste is already there, you don’t need to add any more during the installation process. A few things to keep in mind before starting:
What is thermal transfer material?
Thermal transfer material is used when installing any cooling solution. When people think about thermal paste in the context of building a PC, they’re probably referring to the process of installing a CPU cooler. When you buy a graphics card, for example, the thermal solution is already integrated. You don’t usually have to worry about installing ...
What is an IHS CPU?
If you'd like to learn more about how a CPU is made, you can read more about the manufacturing process. Integrated Heat Spreader (IHS) - The metal “lid” of the CPU. This serves as a heat sink designed to distribute heat from the processor itself to a CPU cooler, as well as provide protection to the processor inside.
What is the central processing unit?
Central Processing Unit (CPU) - The information processing center of a PC. It executes all operational instructions and sends instructions to the other hardware in the computer. If the computer is a body, then the CPU is the brain, and it is absolutely critical to the functioning of any PC.
Can you put thermal paste on a CPU?
It might be tempting to spread the thermal paste onto the CPU yourself. We recommend letting the pressure from the base-plate or waterblock being installed do it for you. Incorrect manual application can cause air bubbles to form in the paste, which can negatively impact the thermal conductivity.
Do I need thermal paste for a CPU cooler?
Most processors require some sort of thermal solution to properly operate at peak efficiency, but the process of installing a CPU cooler in a PC is unique. Every CPU cooler needs thermal paste, but many have it pre-applied, which simplifies the installation process.
