Full Answer
What's the tallest bar you can get on a Street Glide?
Anyone know the tallest bar you can get on there with the stock clutch&brake cable/wiring harness? I've mounted 12.5s on two Street Glides, Needed extensions. I'd say 10.5 or 11 is probably the limit. Thanks. This helps.
What size Yaffe bars for a Street Glide?
I used 13 apes that the handgrips were just above the top of the fairing.i rerouted the clutch cable,throttle wires were fine but the brake line was at its limit.the switch wires were fine also.they were wild ones bars. I installed 12in Yaffe bars on my Street Glide. Went with 6in over on the brake and clutch. Also did the wire extensions.
Which motorcycles have stock handlebars?
Motorcycle Stock Handlebar Measurements - Harley Davidson, Triumph, Victory, Honda, Kawasaki, Suzuki, Yamaha, Buell, Ducati and Indian See how we Measure Handlebars at the bottom of this page and also info on the Harley Davidson use of an electric throttle assembly. New cables and new brake lines?
How tall are the stock bars?
The stock bars are probably about 6-7 in height. Believe me, 12 in bars will feel like night/day compared to stock. That's just ridiculous!! This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
What size are Harley handlebars?
Most Sports bikes have 22mm (7/8”) bars and Harley-Davidsons/Japanese Cruisers have 25mm (1”) handlebars.
What size are stock Road Glide handlebars?
1.25" diameterOr be notified when back in stock. This 1.25" diameter bar features an optimized ergonomic design for taller and long-limbed riders. This 1.25" diameter bar features an optimized ergonomic design for taller and long-limbed riders.
What size handlebars are on a 2021 Road Glide?
15” X 1 1/4” 2015-2021 Road Glide Road 6 Customs Naked Handlebars, gloss black.
What size are my motorcycle handlebars?
Measure the Diameter The most common handlebar diameters are ⅞ inch or 1 inch. However, you can take an accurate measurement of your handlebar width by placing the measuring tape at the end of one of the handlebars and measuring the width.
What height are stock Harley handlebars?
Harley Davidson ModelHarley Davidson DescriptionHeightFXDBDyna Street Bob12-12"FXDWG/IDyna Wide Glide10"FXDWGDyna Wide Glide10"FXDWGDyna Wide Glide (Risers 5")3"49 more rows
How do you measure height of handlebars?
How to Measure Your HandlebarsThe first step is to measure from the bottom of the bar to the highest point on the handlebar. ... Next, measure from the tip of the handlebar end to the opposite tip of the handlebar end. ... For the pullback, measure from the tip of your grip to the front the handlebar.More items...•
What size handlebars are on a 2020 Tri Glide?
Handlebar Diameter: 7/8".
What size are Fat Bob handlebars?
Shop Dyna Fat Bob handlebars in widths ranging from 16 1/4" to 40", and select rise sizes from 0" to 17+".
What size are stock Low Rider S handlebars?
Handlebar diameter: 7/8".
How do you measure a Harley Davidson handlebar riser?
0:091:23How to Properly Measure Handlebar Risers on a Harley DavidsonYouTubeStart of suggested clipEnd of suggested clipIn order to measure it. You would measure from here to the centerline of the handlebar. And thisMoreIn order to measure it. You would measure from here to the centerline of the handlebar. And this one's kind of goofy because it's angled. But I would measure from there to there.
What is standard handlebar Diameter?
Standard handlebar grip area diameters. There are only two current standard sizes: Flat bars have a 22.2 mm (7/8″) grip area diameter. Road (“drop”) bars have a 23.8 mm (15/16″) grip area diameter.
Are all motorcycle handlebars the same Diameter?
Nearly all modern bikes use handlebars with a diameter of 7/8 of an inch, (22mm). Harley Davidson and some Honda customs use 1 inch, (26mm), bars. These are sometimes known as 'fat' bars.