...
Hot Rod's Proven Recipe For A Simple Chevy 383 That Knocks Down 500 HP And 500 LB-FT.
What kind of engine does a 383 Chevy 383 have?
The initial 1959 383s were raised block V-8s with a 4.030-inch bore and 3.750-inch stroke and four-barrel carburetor. This made the 345-horsepower 383 engine block slightly tall.
Is a 383 Stroker combo worth it?
Readers have figured that out, since 383 stroker combos are the ones we get asked about most often, and most of the shops we talk to peddle more 383s than not. These days, if you need to buy a crank when rebuilding your small-block, there's no reason not to add the extra cubes; a 383 is just as cheap as a 350. So you're sold.
How much horsepower does a 383 Hemi have?
Two horsepower ratings were available as Dodge entered the muscle car wars in 1962 and 1963 by following the 1962 Chevrolet Impala Super Sport powered by a 409-ci V-8. Dodge’s 383 could be ordered with a two-barrel carburetor to generate 305 horsepower or the four-barrel carb that provided 330 horsepower.
How much does a 383 crate engine cost?
A brand new 383 crate engine can be purchased there for just under $8,000. The 383 Stroker is popular for people with the Chevy 350 blocks who want a little more power.
How much HP does 383 stroker put out?
The 383 stroker engines have been reported to achieve 330 horsepower with 410 foot-pounds of Torque, 395 horsepower with 410 foot-pounds of Torque and 395 horsepower with 410 foot-pounds of Torque.
How much horsepower does a Chrysler 383 have?
The 383 responded with 338 hp at 5,000 rpm and 394.6 lb-ft at 3,600 rpm.
How much HP does a 383 big-block have?
The affordable and underrated 383 gets a huge boost in the arm by Muscle Motors—to the tune of 559 hp and 611 lb-ft.
Is a 383 and a 440 the same block?
The major difference between these two Mopar legends is the deck height of the block: 9.98-inch for the 383 and 10.725-inch for the 440.
What was the horsepower of a 383?
Horsepower for the engine ranged anywhere from 270 up to 335 depending of course on the compression and carburetor setup.
When was the 383 engine made?
The Chrysler 383 V8 engine was first seen in 1959 and was produced up through 1971. This motor was one of Chrysler’s most widely used engines in the 60s and was found in a large amount of Chrysler, Dodge and Plymouth models.
Why is the 383 V8 so popular?
The 383 V8 became so popular mainly due to the fact that it was so versatile. It was found in more family oriented cars like the Chrysler 300 and Newport as well as muscle cars like the Dodge Charger and Plymouth Barracuda.
How much horsepower does a 383 Stroker have?
The latest version of this crate engine is able to reach 450 horsepower ...
What is a 383 Stroker?
The Chevrolet 383 Stroker is a hot rod engine never truly created in normal production for use in a specific car. The engine is a General Motors Chevrolet engine that is made for hot rod enthusiasts who love to modify their cars and add some extra power. Although this engine was never offered in normal production in any cars, ...
How many valves does a Chevy 383 Stroker have?
The valvetrain uses a conventional camshaft in the block pushrod system with 1 intake and 1 exhaust valve per cylinder, for a total of 16 valves. The Chevy 383 Stroker is a great engine for people who love to work on their hot rod and make adjustments on their own.
How much does a 383 Stroker cost?
A brand new 383 crate engine can be purchased there for just under $8,000.
What engine is used in the Chevy Nova?
The creation of the Chevrolet 383 Stroker was born out of creativity. The engine is essentially a Chevy 350 block, but uses a modified crankshaft from the Chevy 400 for increased stroke and as a result increased displacement.
Why is the 383 Stroker so popular?
Another reason for the popularity is that this range of Chevrolet engines are able to easily swap parts from one engine to another, making it easy to work on and customize the engine just how that enthusiast wants.
How much horsepower does a Chevy crate engine have?
The crate engine from Chevy provides an impressive 450 hp, plenty to have some fun in an old muscle car and brag to your friends about.
duster360 Well-Known Member
Looks like a couple cheap mods would put the 383 at or a little above the advertised 330 horsepower.
baracus Well-Known Member
There was an article in a mopar mag, can't remember which one but it was within the last few years. They did a stock rebuild and go right at the rated hp, ayone familiar?
fratzog lover Well-Known Member
Seems like 5 hp at mopar was always different than 5 hp in my garage. At least with the road runner engine!
fratzog lover Well-Known Member
That was what I was talking about. I also didnt know about the 1966 cam change.
mikedevore Well-Known Member
Would have liked to see that 383 performance package make it to production.
EL5DEMON340 Well-Known Member
From most of the guys I talk to, even GM guys the the 383-335HP RR/bee's were quicker than the 396 325hp and the in most cases the 350hp also. The 375hp 396 would kick it's butt pretty good.
fratzog lover Well-Known Member
What a surprise, the top dog is protected again. GM was noted for that.
pearljam724 Well-Known Member
What was the approximate/proclaimed horsepower of a factory built 383 and 440 big block ?
BeepBeepRR FBBO Gold Member FBBO Gold Member
There were a few different specs for each engine. There was a 383 2bbl, 383 4bbl and a 383 HP and likewise for the 440. Each version had a different HP rating.
66 Sat Well-Known Member
I thought the 440 bbl topped out at 375hp and only the 6 pack 440 was rated at 390?
BeepBeepRR FBBO Gold Member FBBO Gold Member
I thought the 440 bbl topped out at 375hp and only the 6 pack 440 was rated at 390?
BeepBeepRR FBBO Gold Member FBBO Gold Member
lol for some reason I just overlooked the 6 pak. But posted its HP rating. go figure.
biomedtechguy Accelerati Rapidus Maximus FBBO Gold Member
My best friend had a 70 4 speed, N96 Roadrunner back in 79-82. I hooked him up with the owner who sold him the car.
wagonman FBBO Gold Member FBBO Gold Member
My best friend had a 70 4 speed, N96 Roadrunner back in 79-82. I hooked him up with the owner who sold him the car.
How many horsepower does a Dodge 383 have?
Dodge’s 383 could be ordered with a two-barrel carburetor to generate 305 horsepower or the four-barrel carb that provided 330 horsepower.
What year was the 383 engine made?
The 383 was introduced in 1959 to be placed in the Chrysler Windsor and the Saratoga while the luxury Chrysler New Yorker and 300 Series received the slightly larger 413-ci V-8. The initial 1959 383s were raised block V-8s with a 4.030-inch bore and 3.750-inch stroke and four-barrel carburetor. This made the 345-horsepower 383 engine block slightly tall. For 1960, the dimensions were changed to a 4.250-inch bore and significantly reduced 3.380-inch stroke, which converted the engine to a lower profile. In all, 47,219 Windsors and Saratogas were produced with the 383 in 1959 and 52,349 in 1960.
What is a 383 Dodge engine?
Information on 383 Dodge Engines. The Chrysler-owned 383-cubic-inch V-8 Dodge and Plymouth engine was a high-performance powerplant that played a role in the muscle car era of the 1960s and early 1970s before the 426 Hemi rendered it obsolete. The 383 was not initially intended to be used as a race engine but to power the big Chryslers ...
When did the 383 reach its peak?
Power Loss. The 383 reached its peak in power output in 1970 with 335 horsepower, a four-barrel Holley carb and 9.5:1 compression ratio. The following year all Detroit automakers detuned their engines as federally mandated emission standards and rising fuel costs made high-performance engines on street passenger cars impractical.
When was the 330 horsepower boosted?
Power was boosted to 330 in 1969 for the Coronet pursuit cars. Even in 1971, when overall power was reduced on civilian cars, the Coronet police pursuit cars, Dodge Polara, and Plymouth Satellite and Fury still received 330-hp 383s. 00:00.
Which has more displacement, a 383 or a 350?
a 383 has aproximately 9.5% more displacement than a 350
How much horsepower does a performance engine produce?
another way you can look at this is a well tunned PERFORMANCE engine with decent heads and cam, should produce between 1.2 and 1.25 hp per cubic inch of displacement
Does a 383 shift better than a 283?
The 283 will probably have to get to say 5k rpm before it comes alive and depending in where it shifts it will keep getting into lower rpms where it is not as powerful. With the 383 shifts don 't really have the same effect.