IMHO it all depends on how you drive it. If you drive it like you stole it then it can be taken out with stock to 400HP. If taken care of an not romped daily then it should be fine to 500HP.
Full Answer
How much HP can a stock 7.3 Transmission handle?
As long as the 7.3L Power Stroke goes unmodified, the factory E4OD will generally live a while. Although, it can still be killed at the stock 210 hp and 425 lb-ft level with heavy abuse.
How much HP can a 6.4 Powerstroke transmission handle?
The 6.4L Powerstroke was very impressive for the time, offering 350 horsepower and 650 lb/ft of torque. These 6.4L Powerstroke performance specs help these trucks achieve a max tow capacity of 24,600 lbs when properly equipped (2010 F-450).
How much HP can a 6.0 Powerstroke transmission handle?
Even a decade ago, before PCM tuning was anywhere near as refined as it is now, several 6.0L owners proved the 6.0L's bottom end could withstand 700-rwhp. Today, a lot of serious enthusiasts conclude that the 800 hp 6.0 Power Stroke range gets you into unchartered waters with a 6.0L.
How much HP can a 7.3 Powerstroke handle?
The 7.3 Powerstroke is a two-valve behemoth which measures in at 444 cubic inches and has a maximum stock power rating of 275hp and 525lb.
How do I get more power out of my 6.4 Power Stroke?
The quickest way to add horsepower and torque to your 6.4L Powerstroke is by purchasing a tuner or programmer. Tuners and programmers adjust different engine parameters like fueling to improve performance.
How much horsepower can a 6.4 Power Stroke make?
350hpLet's Compare the Hard Facts6.4L SpecsValvetrain:Overhead valve, four valves per cylinderInjection System:Siemens high-pressure common-railFactory Horsepower:350hp at 3,000 rpmFactory Torque:650 lb-ft at 2,000 rpm6 more rows•Jan 4, 2019
How do you get 500hp out of a 7.3 Powerstroke?
Aside from adding a chip, a considerable up-sizing of the fuel injectors is mandatory to get any kind of measurable horsepower out of a 7.3L Power Stroke. For us, the only option is to upgrade to a set of hybrid injectors, and specifically the 238cc version for 500hp goals.
How much hp does a stock 6.0 have?
LET'S COMPARE THE HARD FACTS7.3L SPECS6.0L SPECSVALVETRAINOverhead valve, 2 valves per cylinderOverhead valve, 4 valves per cylinderCOMPRESSION RATIO17.5:118.0:1FACTORY HORSEPOWER210 hp (1994.5) to 275 hp (2003)325 hpFACTORY TORQUE425 lb-ft (1994.5) to 525 lb-ft (2003)560 lb-ft (2003-2004) to 570 lb-ft (2005-2007)3 more rows•Sep 13, 2016
How can I make my Ford 6.0 faster?
6.0 Powerstroke Intake Upgrade An upgraded intake is our first recommendation on any turbo-diesel. Even if you aren't looking for crazy power we still recommend an intake system. Performance intake systems, or cold air intakes as they are commonly referred to, increase airflow to the engine.
How much boost can a stock 7.3 handle?
30-35 psi'94.5-'99 7.3L: 380 to 400rwhp Either charger can hold up to 30-35 psi of boost for a while, but 40 psi or more is asking a lot for a turbo that was originally intended to see a maximum of 17 to 23 psi.
What is the highest hp 7.3 Powerstroke?
2,180HP and 2,821 LB-FT With the aforementioned 15mm P-pump and the 4.4-inch turbo bolted in place, the engine belted out 2,180 hp (at 4,600 rpm) and 2,821 lb-ft of torque. As far as publicly release numbers are concerned, this makes their engine the most powerful 7.3L on record.
How much horsepower does the 7.3 Godzilla have?
But last year, Ford Motor Company did just that when it released its new 7.3L gasoline V8 dubbed “Godzilla.” The big V8 is designed for Super Duty trucks and produces 430 horsepower at 5,500 rpm and best-in-class torque with 475 ft. -lb. at 4,000 rpm.
How much horsepower can a stock z31 automatic tranny handle??
I am in the final stages of finishing a turbo vg30 swap into a m30. Apparently the stock transmission did not like the amount of horse power the engine was making and went to crap. I still want to put a automatic in the car because it will be mostly used for dragracing.
Re: How much horsepower can a stock z31 automatic tranny handle?? (speeddocsson)
speeddocsson wrote: I am in the final stages of finishing a turbo vg30 swap into a m30. Apparently the stock transmission did not like the amount of horse power the engine was making and went to crap. I still want to put a automatic in the car because it will be mostly used for dragracing.
Re: How much horsepower can a stock z31 automatic tranny handle?? (Flicktitty)
I'd agree with these guys. You will have far more luck with a TT Z32 A/T. Also
Re: (evildky)
ILL GET SOME PICS.....How easy is it to put a power glide in? is it a close match up to original space in the frame....like will i have to screw with the interior?
Re: (speeddocsson)
O and what would be the cheapest option...... im 17 and money doesn't grow on trees haha. I have most of the car finished i just need to finish the rear suspension and fix my camber issues in the front....... Just need the freakin tranny!
Re: How much horsepower can a stock z31 automatic tranny handle?? (JDMZ32)
Yeah....i just noticed that my bad.....you guys have still been allot of help i appreciate it.
Re: (speeddocsson)
speeddocsson wrote: ILL GET SOME PICS.....How easy is it to put a power glide in? is it a close match up to original space in the frame....like will i have to screw with the interior?