It will usually give you around 30% more power on turbocharged vehicles and 15% on NA (naturally aspirated) engines, but you mileage will vary depending on the tuning mods you've done and the condition of your engine. Pushing air and fuel into the B16 engine is the whole point to any performance tuning task.
Full Answer
What's the best way to increase power on a B16?
Big valve conversions on the B16, getting port work and head flowing will also improve power, and importantly will afford you a better power increase on other parts. The more air to get into an engine, the more fuel it can burn and uprating the induction with a turbocharger upgrade makes massive power gains.
How much more power does a B16 Tune add?
It will usually give you around 30% more power on turbocharged vehicles and 15% on NASP engines, but you mileage will vary depending on the tuning mods you've done and the condition of your engine. Pushing air and fuel into the B16 engine is the whole point to any performance tuning task.
Are B16 engines reliable?
The B16 engines are generally extremely reliable and solid as long as they are regularly serviced and maintained. Problems and weakspots are thankfully unheard of if the car is well maintained and looked after. Regular oil changes are vital on the B16, especially when tuned and will help extend the life and reliability of the engine.
What is a B16 air intake manifold?
Pushing air and fuel into the B16 engine is the whole point to any performance tuning task. Air Intake manifolds take the air during the suck phase from the air cleaner and allow it to be pulled into the engine and mixed with fuel.
How much HP does a B16B make?
Lastly, the infamous B16B was found in the extremely rare Japanese-spec Civic Type-R. This 1.6L sported a high 10.8:1 compression ratio and put out 185 hp @ 8,200 rpm and 118 ft-lbs of torque @ 7,500 rpm.
How much boost can a Type R handle?
2017 Honda Civic Type R - PowertrainFeature2017 Civic EX-T 1.5L Turbo2017 Civic Type R 2.0L TurboMaximum Boost (psi)16.522.8Fuel InjectionDirectDirectProgrammed Fuel Injection (PGM-FI)Valvetrain16-Valve DOHC w/dual VTC16-Valve DOHC VTEC w/intake VTC16 more rows•Jun 14, 2017
How much HP does a stock B16 make?
In near-stock trim the turbo B16A ultimately produced 507 hp and 339 lb-ft of torque-a far cry from its 171hp naturally aspirated baseline. Remember that 500 hp worth of stock-block B16A goodness (except for forged pistons) was made possible by little more than some good old-fashioned tuning.
What car came with a B16A?
B16A found in: 1989-1993 Honda Integra XSi. 1989-1991 Honda CRX SiR (EF8) 1989-1991 Honda Civic SiR (EF9)
How much HP can stock Type R handle?
Since the Type R is an enthusiast vehicle some people have been modifying the engines to make more power. If you want to keep your stock ECU and turbos you can expect to max out the engine at about 380 wheel horsepower and about the same amount of torque.
How much HP can K20C1 handle?
K20C1 Crate Engine: New production line K20C1 long block. Compact, lightweight, 2.0L turbocharged engine, capable of over 300 horsepower & 300 lb-f of torque from 91 higher octane fuel.
What is a B16B engine?
B16B (Type R) For this, they opted for a de-stroked equivalent of the Integra Type-R B18 engine, which provided a new height of 212.4mm. This additional space allowed for an upgraded crankshaft, pistons, and longer, lightweight connecting rods, which provided a rod-to-stroke (RS) ratio of 1.85:1.
How much HP does a B20 make?
With the engine firmly in place, the 11.8:1 B20-VTEC produces 227 hp and 167 lb-ft of torque.
How much does a b16 engine weight?
B series VTEC: 405 pounds The Japanese-spec B16B, because of its 1.8L-like deck height and Type R top end, also weighs about the same. Although smaller in displacement, Honda's B16A family weighs about 5 pounds less than its 1.8L VTEC counterparts, mostly due to a shorter deck height.
At what RPM does VTEC engage?
3000-5400 RPMAt 3000-5400 RPM, depending on load, one of the VTEC solenoids engages, which causes the second valve to lock onto the first valve's camshaft lobe. Also called 16-valve mode, this method resembles a normal engine operating mode and improves the mid-range power curve.
Is K series better than B Series?
“The K series is better by a long shot: the head flows higher CFM's it has roller rockers and bigger displacement,” said Rodcharoen. In the realm of forced induction, the gap between the K-series and B-series narrows.
What year del Sol came with b16?
1994U.S. Domestic Market changes for 1994: Added VTEC trim level, with B16A3 engine (DOHC VTEC) 160 hp (119 kW) 118 lb⋅ft (160 N⋅m) (U.S.), 9000 rpm tachometer, and improved suspension (U.S.) S trim level receives front sway bar. Dual SRS airbags standard (U.S.)