Full Answer
How much HP can a B20 Turbo handle?
B20 turbo should run fine at 280-300 whp depending on the condition of the motor, turbo parts, and the tune. The sleeves are thinner by a SMALL amount on the b20.
Can you beat the balls out of a B20 motor?
You can beat the balls out of any motor and eventually it will break, idc if its sleeved or whatever, any motor has a limit and abusing them does nothing but shorten the life span. The good thing about b20's is, you blow it up you can get another one for 500 shipped from Tiger.
How much is a B20Z worth?
So thats out of the way now, the b20z is $900 which i have and if i crack it its not as easy as buying another bc if it cracks why would i get another? I will never buy another B20 FOR A BOOSTED CAR again.
How much HP can A B motor handle?
I am a firm believer in proper tuning, engine health, and proper maintenance. There are "standard" B motors that are pushed to 400+whp and daily driven for 2-3yrs without any major problems.
How much horsepower does a stock B20B have?
How Much Hp Does A B20B Make?Honda B engineOutputPower output100–200 hp (75–149 kW; 101–203 PS)Torque output150–190 N⋅m (111–140 lb⋅ft)ChronologyFeb 16, 2022
Is a B20 block good for boost?
B20/VTEC motors are great for boost if built properly.
How many liters is a B20B?
Honda B engineDisplacement1.6–2.0 L; 97.3–120.4 cu in (1,595–1,973 cc)Cylinder bore81 mm (3.19 in) 84 mm (3.31 in)Piston stroke77.4 mm (3.05 in) 81.4 mm (3.20 in) 87.2 mm (3.43 in) 89 mm (3.5 in)ValvetrainDOHC with VTEC (in some models)18 more rows
How much does a B20 engine weight?
"The complete engine is in the neighborhood of just under 350 lbs. A cylinder head is about 40-45 lbs."
Is the Honda B20 a good engine?
The B20B and B20Z shared similar traits with the popular B16/B18 series. The B-Series engines have become the most coveted Honda engines due to their reliability and the ability to produce high horsepower relative to their displacement.
At what RPM does VTEC engage?
3000-5400 RPMAt 3000-5400 RPM, depending on load, one of the VTEC solenoids engages, which causes the second valve to lock onto the first valve's camshaft lobe. Also called 16-valve mode, this method resembles a normal engine operating mode and improves the mid-range power curve.
Is K series better than B-Series?
“The K series is better by a long shot: the head flows higher CFM's it has roller rockers and bigger displacement,” said Rodcharoen. In the realm of forced induction, the gap between the K-series and B-series narrows.
How many quarts does a b20b take?
Engine Oil With filter 4 quartsAfter refill check oil level.
How heavy is a k20?
K20AHonda K20APower outputSee left for specific application.Torque outputSee left for specific application.DimensionsDry weight403lbs (with gearbox), 275lbs (without gearbox)18 more rows
How heavy is a k24 engine?
2.4L K series: 413 pounds For example, the TSX's K24A2 that features VTEC on both camshafts weighs in at the top, followed by 2.4L Accord engines and finally the CR-V's K24Z1.
How much whp does a B20 turbo run?
The sleeves are thinner by a SMALL amount on the b20. My bro has a LS and B20 block side to side, not much of a difference.#N#B20 turbo should run fine at 280-300 whp depending on the condition of the motor, turbo parts, and the tune.
What does PSI do when your motor blows?
PSI has nothing to do on when your motor decides to blow. You're working backwards by picking a PSI goal.
Do turbo cams increase spool response?
Don't concern yourself with the cams. Most dyno results I see before and after "turbo" cams show that turbo cams increase turbo spool response, but decrease peak horsepower.
Is the B20 block thinner than the LS?
The sleeves are thinner by a SMALL amount on the b20. My bro has a LS and B20 block side to side, not much of a difference.
Can a B20A handle a B21?
The B20a can't handle much, the rods are weak and the motors are old. Same goes with b21's they aren't that strong either so if you want HP you'll usually have to rebuild and upgrade rods, Headgasket and I'd recommend Arp studs
Does a B21A1 boost eat piston rings?
b21a1 boosted will eat up you piston rings crazy fast the b20a engine is very different from a b20b its better to have a hp goal and see what needs to be done to achieve it safely then to see what limit you can push, generally stock can handle 50% over its original hp.
how much boost can a stock rb20det handle?
if i was to upgrade my turbo, and fuel injectors, and got a tune how high could the boost be ran with stock internals, let me know thanks also what turbos, (links to them), will bolt to the stock mani thanks
Re: how much boost can a stock rb20det handle? (black240jl)
basically, your answer is "search"...I honestly haven't looked into turbo upgrades, but seriously try a search for the two things: "stock internals" and then "turbo upgrade (s)" using the google bar at the top right, and you will find all kinds of stuff and all kinds of threads about people's setups.
Re: how much boost can a stock rb20det handle? (black240jl)
IBTL?? irs'ed?? you have both lost me. Mine wasn't done too well, so I traded it for a 96 eclipse after about a year and a half. I liked my shaved ride with the remote door poppers tho. I am going to update my "old rides" page one of these days....anyway, I guess we are off topic.
Re: how much boost can a stock rb20det handle? (black240jl)
Boost is irrelavent unless you know what turbo your running,and the tune will also determine what the break point will be.
Re: how much boost can a stock rb20det handle? (craz4240)
i see, but there has to be a certian limit ofboost the motor can handle tho and im jut wondering what it is, caz i want to upgrade my turbo and injectors and turn the boost up and geta tune, and im jsut wondering how high the boost can go for it to still be reliable
Re: (Carl H)
did u have any probs at 18psi?, where are some links to turbos that bolt to the stock mani, i kinda want a garrett, what model bolts up and supports around 300whp?
Re: (black240jl)
Holset HY35....good power,quick spool,bolts to the stock mani with small mods,will get you to 300whp,and is cheap. Get a good tune...run that sucker at 15psi with some 550cc injectors and a z32 mafs and voila your the man.
How much horsepower does SR20TurboFreak make?
SR20TurboFreak made 500.3whp on a stock GTI-R bottom end at 25psi i beleive?
How much psi does a turbo engine have?
The turbo produces 30-40 psi on an engine that already has 18-22:1 compression. Of course, that IS a compression ignition engine. Click to expand... Yeah i was just yanking the guys chain, its a diesel but mine has a internal gated turbo with a few tricks up its sleeve.
How good is stock det?
stock det is generaly good to about 400hp. Its ot goin to last forever at 400hp but it should be good for a couple years. some people however do make even more. jgy's rag sentra is a stock det making around 600hp.