The measurement is actually the distance from the line defined by the rib (and parallel to the bores), to the spot on the comb being measured. One can get rough stock dimensions of drop by placing a shotgun upside down on its barrels (and thus the rib) and taking the measure from the comb to the tabletop.
Full Answer
What are the Stock measurements for a rifle?
The pertinent stock measurements are: Length of Pull, Cast, and Drop. They are defined thus: Length of Pull: the distance from the front trigger to the center of the butt. Drop at Comb: extent of vertical offset between the top of the barrels ( rib) and the comb of the butt-stock.
What does Browning measure for shotgun stock size?
Since exhaustive research and experimentation have shown that these three measurements can greatly affect shotgun shooting success, Browning takes special care to meet the most desirable measurements in each stock produced. Length of Pull is the distance from the middle of the butt (recoil pad) to the trigger.
How do you measure the length of pull on a rifle?
Now, using a tape or similar device, measure from the inside of the elbow, just below the bicep, straight down the forearm to the middle of the pad on your trigger finger. You now have the measurement for your length of pull on a rifle stock. 13.50” is the standard length of pull for a US made rifle stock.
What does stock length mean on a shotgun?
Length or the shotgun length of pull is the measurement between the centre of the trigger and the centre of the butt. Typically, this will range anywhere from 14 1/4″ to 15 1/2″ for a gun designed to be used by an adult. ... If the stock length is too short, you’re likely to feel more recoil and have less control when handling the gun.
How is the length of stock measured?
0:091:51Quick Tip: Measuring Length of Pull - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can measure with the tape measure. Just put the hook on the trigger. And about halfway up youMoreYou can measure with the tape measure. Just put the hook on the trigger. And about halfway up you want the center of the pad. This one has 14 inches.
How long should a gun stock be?
Length of pull is one of the most important aspects when determining whether the firearm will fit you correctly. Determining the correct LOP is crucial to ensure proper eye relief and establish a repeatable shooting position. The standard length on all H-S Precision stocks (and many others) is 13.5 inches.
How is a shotgun stock measured?
The pertinent stock measurements are: Length of Pull, Cast, and Drop. They are defined thus: Length of Pull: the distance from the front trigger to the center of the butt. Drop at Comb: extent of vertical offset between the top of the barrels (rib) and the comb of the butt-stock.
How does the ATF measure overall length?
The ATF procedure for measuring barrel length is to measure from the closed bolt (or breech-face) to the furthermost end of the barrel or permanently attached muzzle device.
Does length pull matter?
It is one of the most important aspects of a gun's dimensions and determines whether the gun will fit you. Meaning how comfortable the gun feels to you and how accurate you can shoot it. With the correct length of pull, you will have quick sight acquisition, better control, better accuracy, and feel more comfortable.
What is length of pull AR 15?
The average length of pull for a standard AR-15 is around 13 inches. An adjustable stock works well for shooters whose ideal length of pull doesn't meet this average measurement. Length of pull can also vary based on the clothes you're wearing.
How wide is a gun stock?
J.C. RIFLE STOCKLengthThicknessButt Width32 in2 in.6 in.812 mm51 mm152 mm
What is the heel of a gun stock?
Yes, stocks have a heel and a toe. A heel has the job of finding the pocket of the shooters shoulder. Some guys like a round heel and some like a more pointed one. The toe is there to take most of the recoil down into your body.
What is the stock of a shotgun?
A gunstock or often simply stock, the back portion of which is also known as a shoulder stock, a buttstock or simply a butt, is a part of a long gun that provides structural support, to which the barrel, action, and firing mechanism are attached.
Does a silencer count as barrel length?
In summary, the length of a permanently attached muzzle device is added to both the barrel length and the OAL of a firearm for purposes of evaluating whether said firearm falls under the purview of the NFA.
What length is considered AR pistol?
26 inchesAn AR pistol is considered any barrel shorter than 16 inches with an overall length of the gun not to exceed 26 inches. You cannot attach a vertical foregrip to an AR pistol. You can use an angled foregrip or a micro handstop.
Does barrel length include chamber?
2.1 When measuring the barrel of a firearm that has an integral chamber, the distance parallel to the bore axis from the muzzle end to the breech face (with the action closed) represents the length of a barrel. All measurements are made perpendicular to the bore axis at the farthest point of the barrel.
HOW TO MEASURE YOUR CURRENT LENGTH OF PULL
To measure your current length of pull, the only items you will need are a tape measure and your stock. From the center of the trigger, measure to the back of the recoil pad in a straight line. Be sure you are centered within the trigger shoe, not forward or touching the back, for proper measurement.
HOW TO MEASURE YOUR CORRECT LENGTH OF PULL
For a stock installed onto a rifle, you will want to shoulder the firearm into a good shooting position. Note: your eye position will not be perfect if the length of pull on your stock is not correct.
ALTERNATIVE STYLE WHEN FACTORING YOUR LENGTH OF PULL
Sometimes a fixed stock may not be the best option for how your specific rifle application. If multiple shooters will be using the stock, your attire adjusts drastically, or if you’re looking to add more weight to your build — an adjustable LOP may be the ideal alternative.
SELECTING YOUR PRO-SERIES STOCK
H-S Precision offers a variety of aftermarket stocks. For brands such as Remington, Howa, Weatherby, and more, shooters are able to select from different models, styles, grips, and of course — length of pull.
What is the standard length of pull on a rifle stock?
You now have the measurement for your length of pull on a rifle stock. 13.50” is the standard length of pull for a US made rifle stock. If you are over that number ( like the person in the picture ), you need a longer stock. If you are under that number, you need a shorter stock. If you live, or are going to operate/hunt, ...
How to measure the length of pull on a rifle?
Curl your finger into a natural trigger position. Now, using a tape or similar device, measure from the inside of the elbow, just below the bicep, straight down the forearm to the middle of the pad on your trigger finger. You now have the measurement for your length of pull on a rifle stock.
How to make a pistol grip?
Standing straight up, with your arms hanging at your sides, you need only to bend your arm at the elbow to 90 degrees to the front. Keeping your wrist straight & in line with your forearm, now make an imaginary pistol style grip with your hand. Curl your finger into a natural trigger position . Now, using a tape or similar device, measure from ...
Where is drop measured on a gun?
Drop is measured in three places – at the face, at the comb and at the heel although the latter two are the most common. See the diagram above for a visual of where the points are on the gun. Also note the degree of pitch on the diagram, this is a measurement of the angle between the line of the butt and the line of the rib.
How to tell if a gun is too long?
A sign that the length is too long is if when mounting the gun, you aren’t able to mount the gun into the shoulder pocket but instead it ends up being mounted on the end of your arm.
How to check for cast issues?
To check for cast issues, get back in front of the mirror (again with a proven empty and safe gun) and see if your eye sits centrally on the rib of the gun (without having to roll your head). The image below shows the correct position plus two wrong positions.
What is the correct gun fit?
Correct gun fit is one of the three fundamental building blocks to successful shotgun shooting. We have already covered the other two – eye dominance and gun mount so this article completes the foundation series.
What happens if your stock is too short?
If the stock length is too short, you’re likely to feel more recoil and have less control when handling the gun. When it comes to temporary solutions for remedying a short stock, a slip on recoil pad can be helpful and some come with different sized foam inserts which allow you to extend the stock by different lengths.
What should the iris be on a gun?
The iris should sit central and directly on top it of it, like this: If you see any of the below, the drop on your gun is either too much or too little. If your eye sits too high in relation to the rib, seek advice from a good gunsmith as alterations to the stock may be needed.
How long is a shotgun pull?
Typically, this will range anywhere from 14 1/4″ to 15 1/2″ for a gun designed to be used by an adult.
