26" long (fully assembled) 66.04cm long (fully assembled) 13" long (sans accessories)
Full Answer
What is the Nerf Retaliator shoulder stock?
The Retaliator shoulder stock is a Nerf detachable shoulder stock that was released in 2012 under the N-Strike Elite series. It comes packaged with the Retaliator and the 2019 Rampage, and cannot be purchased separately. The Retaliator shoulder stock is a short shoulder stock meant to provide stability when firing a blaster.
How do I modify my Nerf Retaliator?
In the following steps you will find the information you need to SuperTak modify your Nerf Retaliator. Firstly you will need to unscrew all screws on the stock of the Retaliator. Once all screws are removed, pry open both halves of the stock, and remove the orange stock support insert, which is not secured in any other way.
What is the Nerf N-Strike Elite Retaliator Blaster?
The Nerf N-Strike Elite Retaliator blaster is four blasters in one. Modify your blaster for any mission by changing its configuration in moments. Three interchangeable components give you the correct options for any situation, and the components work with many other N-Strike Elite blasters (each sold separately).
How many darts does the N-Strike Retaliator hold?
The Stock, Barrel Extension and Assault Grip snap on and off quickly and easily. The included clip holds up to 12 Elite Darts, which are compatible with all N-STRIKE ELITE blasters and some original N-STRIKE blasters. The Retaliator is a direct successor to the 2008 N-Strike Recon CS-6.
How long is a Nerf Retaliator?
Replacement InstructionsBrandNerfMaterialPlasticItem Dimensions LxWxH7.6 x 48.3 x 29.2 CentimetersItem Weight1176 GramsMaximum Range90 Feet
Do they still make the Nerf Retaliator?
The NERF Retaliator has been in the NERF range since 2012 with just an update to Elite XD internals in 2014. While still available it looks like NERF are going to be phasing it out in favor of the N-Strike Modulus Recon MKII.
How far can a Retaliator shoot?
The Nerf Retaliator is a high-spring action semi-automatic foam dart gun that can shoot darts upto 50 ft with great accuracy.
What gun is the Nerf Retaliator based on?
The Retaliator is a direct successor to the 2008 N-Strike Recon CS-6. The barrel extension is the exact same as the Recon's, the two main differences being its new color scheme and the addition of clockwise rifling.
Is the Retaliator good?
As one of the most powerful of the Elite blasters, the Retaliator lends itself well to firing off darts from longer range. Its unusually high muzzle velocity gives it a slightly longer range than most of its fellow blasters.
Is Retaliator a good nerf gun?
Good accuracy and range. Solves the purpose its made for. One of the best nerf guns. Number of bullets is 12, which is a good number in itself.
What is the longest range nerf gun?
NERF N-Strike Elite Centurion Blaster This blaster makes it to the top of the best long-range NERF gun because darts fired from its barrel travel a mega distance. Imagine taking out your opponent some 100 feet away!
What Nerf shoots the farthest?
Nerf N-Strike Elite Centurion Blaster If you're looking for the most distance in any nerf gun, this is the number one long distance sniper-type gun on the market. It uses Mega Darts loaded into a clip that are engineered to fly farther than ever before (up to an impressive 100 feet).
Which toy gun shoots the farthest?
Nerf Ultra Darts, the Farthest Flying Nerf Darts Ever Load them into the Nerf Ultra One blaster and fire them an awesome 120 feet (36 meters)!
What is Nerf Slam fire?
Slam fire (alternatively slam-fire), or rapid fire, is a type of firing mode that allows darts to fire more rapidly on certain Nerf blasters. The first blaster to feature the ability to slam fire was the Raider CS-35.
What is the best Nerf gun ever?
The Nerf Ultra One Motorised Blaster is the king of all Nerf guns. Not only is it motorized, but it can hold a whopping 25 darts at once making it great for use in Nerf wars. With a high capacity dart drum that can hold 25 Nerf Ultra darts at once, this Nerf gun allows you to fire and reload fast.
How do you mod a Nerf Retaliator?
0:196:27How to Pack-a-Punch the Retaliator! Simple Nerf Mod Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipTaking out locks is very simple you just slide them out and that's it I think it's too complicated.MoreTaking out locks is very simple you just slide them out and that's it I think it's too complicated. When you take out the locks you'll just remove some of those silly.
When did the Retaliator come out?
The Retaliator is a Nerf blaster that was released on August 1, 2012 under the N-Strike Elite series. It comes packaged with a barrel extension, a shoulder stock, an Assault Grip, twelve Elite Darts, a twelve dart clip, and instructions.
What is a retaliator?
The Retaliator is a slide-action clip system blaster advertised as a "4-in-1" blaster. Using the included accessories, the Retaliator can be customized to the user's desire, allowing them to create their own blaster.
How many darts are in the Rapid Strike Mission Kit?
The Retaliator, without its accessories, is included in the Rapid Strike Mission Kit, along with two eighteen dart clips and thirty-six darts. The European release of the Rapid Strike Mission Kit features an "economy" Retaliator with considerably fewer paint operations than all other releases.
Where is a dart stored?
A single dart can be stored in its handle, like the Recon CS-6. It has barrel extension and detachable shoulder stock attachment points, the latter of which having an integrated priming indicator for when the blaster is primed and ready for use.
Is the Retaliator the same as the Recon?
The Retaliator is a direct successor to the 2008 N-Strike Recon CS-6. The barrel extension is the exact same as the Recon's, the two main differences being its new color scheme and the addition of clockwise rifling. It was re-released in 2013 under the Sonic ICE series, sporting the Sonic ICE color scheme.
Can you remove the barrel extension from a retaliator?
Some have reported that the Retaliator's barrel extension can be extremely hard to remove from the main blaster on some models. [citation needed] The standard and "economy" Retaliator variants can be easily told apart from the packaging.
What color is the Retaliator shoulder stock?
The Retaliator shoulder stock features a color-combination of blue, white, black and orange, with blue being the most commonly-featured throughout the stock. There is an orange bar at the bottom of the stock which is designed to help with stability. Platinum Collection Build Your Own Bundle.
Is the Retaliator stock comfortable?
Trivia. The stock is not comfortable for some users, as it is squared on the back and very short. The stock is designed so that the Retaliator's priming indicator will still be visible when the stock is equipped to it. This applies to many other blasters.
Is the Retaliator stock shorter than the Pyragon?
Overall, the stock is a bit shorter in length than many others. The Retaliator stock's attachment point is too short to fit correctly on the Vortex Pyragon, as found by Basic Nerf.
First Impression with Unboxing
With the blaster being pretty on the compact side, it’s not hard to tell that this is going to be a very easy to handle type. However, with the barrel extension and stock, it does look a bit larger.
How Handy It Is & Thoughts on The Design?
The fixed stock is pretty stable but for the cost of being quite short. Now, this could be enough for a few users. Especially those who are below 6 feet in height. For example, kids can find the stock very perfect. But someone who is above 6 feet height may not feel the same way. However, after long time using, you should outgrow with the matter.
All About Firing & Loading
With the Retaliator, firing is quite fun and easy to handle. You simply need to pull the priming handle back. And then after squeezing the trigger you’ll see it fire. The reliable mechanism is pretty impressive. And also, you can use slightly worn darts without noticing many jam issues.
Does It Get Scores for Accuracy & Range?
The whole matter of accuracy actually depends largely on darts. Unless the situation has rifling in longer barrels. Retaliator does not fall into the category. So, dart type and the condition will highly define overall accuracy. Sometimes it can play as a limiting factor.
How should you use it?
Start by loading the 12 Nerf darts into the magazine. And then insert it into the retaliator. Then you need to draw and prime. Pull the trigger and it will start firing. You need to keep on drawing and priming for each fire. Also, you need to reload darts into the magazine.
Who Can Use the Nerf N-Strike Elite Retaliator Blaster?
The Retaliator Blaster will work for anyone who is older than 8 years old. However, if the proper safety measurements are taken, then any age player can play it. Ensuring the right safety and practicing to target accurate are mandatory for younger players.
Does Using Not-Official Darts Make the Performance Poor?
Using the official Nerf darts is very important if you want it to last longer. Including flimsy darts can make things worse. Also, you need to change the darts once they seem to worn out. As there can be jam noticeable due to too worn-out darts.
What is the best Nerf blaster?
The Nerf Elite Retaliator is widely noted as one of the best blasters in Nerf's Elite lineup. It has good looks, range, and size and can easily reshape or added to thanks to Nerf's wide array of attachments. As one of the most popular Nerf blasters in recent history, it has truly earned itself a place in the minds of all avid foam dart launcher ...
How to balance a retaliator?
Adding weight to the front and back of the blaster will add balance to the Retaliator and make the internals more sturdy.#N#Hot glue a metal weight in the handle of the blaster and in the front of the blaster as exhibited in pictures 4 and 5. Putting one weight in each half of the shell improves balance substantially. Also add hot glue in the opposite sides of the shell. Try to be neat when gluing to prevent inhibiting the function of the blaster.#N#Once you have finished adding weight and the glue has dried, close up both halves of the blaster, making sure all pieces such as the accessory tooth and trigger (and all springs) are back in place. Replace all screws on the blaster.#N#The internal modifications are complete.
How to attach scope to retaliator?
Please note that this is a permanent attachment.#N#To attach the scope to the blaster, cut out a rectangular piece of cardboard that will fit in the attachment pieces of the scope (picture 3). Continue to add pieces of cardboard to get a snug fit. Next, add hot glue to secure the cardboard. Finally, hot glue the scope onto the priming slide of the Retaliator ( picture 6). Make sure it is facing in the right direction!#N#Once the scope has been glued on, test to see if you can prime the blaster by pulling on the scope. If not, add more glue in small amounts to any open cavities. Try not to get glue on any other parts if the blaster.
How to make a stock shape?
Determine the basic stock shape desired/needed with a Sharpie marker on a large (bigger than the stock) piece of cardboard. Cut out this shape, and trace it onto another piece of cardboard to get two identical halves.# N#Place one cardboard piece on the stock and mark any edits (such as the stock-removal buttons) onto the cardboard using a pencil. Transfer all edits and marks on to the other piece of cardboard as well.#N#When both halves of the stock shape are ready, hot glue both pieces onto the sides of the stock, taking care to align them as closely as possible on the X, Y, and Z axes.#N#Once again trace any necessary shape edits (such as a thumb opening) onto the cardboard with a pencil and transfer them to the other side as well.
How to use a dart blaster?
1) Pull the priming slide all the way back. 2) Pull one of the magazine releases (pictures 3 and 4) and remove the magazine. 3) Load the specified amount (6, 12, 18, or 36) of darts and reinsert the magazine into the blaster.
Does the barrel on a blaster have ridges?
The barrel looks strange and actually decreases the performance of the blaster, despite it's being rifled (spiral ridges) on the inside. Thirdly, the blaster's paint job leaves a lot to be desired. There are a few simple modifications that can be done to fix these problems. Such modifications include.
Step 2: Removing the Struts From the Lock Block
There are two pins keeping the struts connected to the lock mechanism.
Step 3: Isolating the Struts
Once the pins are removed the struts can be removed from the locking mechanism.
