Flashing to your original stock tune is the same thing as removing the current tune from your car. Copy the stock file to your AutoCal, connect to your car, and flash it in. Make sure you have your tuned file saved somewhere too, sounds like you do already but this is your last chance to read it out before it's replaced with the stock tune.
Full Answer
Does efilive provide support for AutoCal tuners?
Supporting AutoCal Tuners are responsible for supporting customers to whom they have provided AutoCal devices. Unlike FlashScan, EFILive will not provide support directly to AutoCal end users. EFILive will provide support only to the owner of the FlashScan device to which an AutoCal is registered.
How do I unlink my AutoCal from my tuner?
Physically Unlink AutoCal; where the tuner requires both FlashScan and AutoCal to unlink the device. 2. Remotely Unlink AutoCal; where the tuner will send you an activation code and instructions on how to unlink your AutoCal from the tuner’s FlashScan.
Can I use AutoCal to create tunes?
AutoCal cannot be used to create or change tune files. Tunes from multiple sources can be flashed with FlashScan, however AutoCal is limited to flashing tunes provided by a single tuner. A FlashScan Device is Required FlashScan is required to create tunes for an AutoCal device. AutoCal devices cannot create tunes.
Can I update the software and firmware of my AutoCal tuner?
AutoCal users should only update software and firmware at their tuners specific request. Updating to software and firmware versions higher than your tuner may lead to your tuner being unable to offer you support until they update.
How do I flash tunes to AutoCal?
0:042:29Flashing Tunes Onto Your Truck With Autocal / Flashscan - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst thing we're gonna do is plug in our obd2 cable to the top of our Spade. Then we're gonna plugMoreFirst thing we're gonna do is plug in our obd2 cable to the top of our Spade. Then we're gonna plug our obd2 cable into the obd2 port on the truck.
How do you flash a Duramax back to stock?
This article will walk you through flashing your 2011-2016 DuramaxTurn the key two clicks forward to the Run position (engine off)Plug the SPADE into your truck using the OBD cable.Toggle down to Tuning Tool.Toggle to Program Full.Toggle to the Stock File and press okay.More items...
How do I get my stock tune back on EFI live?
Use the EFI Live explorer to copy your stock tune file from the "read" file in the program to your desktop. E-mail this file it to your tuner so they can re-save the stock file you took off your truck into a flash tune file. This new tune file will be a stock file that you can now flash to the truck.
Can you tune with AutoCal?
AutoCal devices cannot create tunes. In order to copy files to and from your AutoCal device and your computer, the EFILive V8 Scan and Tune Application must be installed. The installation of the software also provides the device drivers for your AutoCal device.
How do I flash my ECM Duramax?
How to successfully FLASH your LML Duramax (2011-16)Step 1: Plug in the SPADE unit to the OBD2 port.Step 2: Turn Key to RUN position.Step 3: Scroll down to TUNING TOOL, CLICK OK, SCROLL DOWN TO PROGRAM FULL, CLICK OK, FIND #7 STOCK FILE, CLICK OK.More items...•
How do I load a TCM tune?
To load your TCM tunes: Plug SPADE into your truck using the OBD cable 3. Toggle down to Tuning Tool, press OK 4. Toggle to Program Full, Hit OK, Then select MOD TCM 5. The Spade will check to make sure the TCM is available for flashing.
How many tunes can an AutoCal hold?
For many tuners who use AutoCal to provide tunes for their customers' personal vehicles, one VIN slot is plenty. For those remaining tuners where 8 VIN licenses is not enough, EFILive is pleased to announce an increase in AutoCal's license capacity from 8 to 221, to match the existing limit in FlashScan devices.
How do I update my AutoCal firmware?
Click the [Check Firmware] button at the top of the window. Boot Block and Firmware versions, along with Configuration files are displayed. If a firmware update is available then the [Update Firmware] button will be visible. You should click that button to update the firmware in the connected device.
How do you tell what EFI live tunes I have?
If you have the ability to find out who the prior owner is you can contact him and find out who tuned the truck. Then call the tuner and provide the VIN and they can tell you what tune they sold. You could also call the major tuners and see it they have a record of tuning that VIN.
What is the difference between FlashScan and AutoCal?
Differences between FlashScan and AutoCal AutoCal, only the tuner has that ability. AutoCal cannot be used to create or change tune files. Tunes from multiple sources can be flashed with FlashScan, however AutoCal is limited to flashing tunes provided by a single tuner.
How do I update my EFILive AutoCal?
Click the [Check Firmware] button. Boot Block and Firmware versions, along with Configuration files are displayed. If a boot block update is available then the [Update Boot Block] button will be visible. You should click that button to update the firmware in the connected device.
How do I unlink my AutoCal?
Tuners can manage unlinking of an AutoCal by physically unlinking AutoCal or by generating a Remote-Unlink Code that can be emailed to their customer. Refer to the FlashScan Link to AutoCal help file for more information. AutoCal End Users can also purchase the AutoCal Unlink product from the EFILive store.
How to use AutoCal V3?
Use AutoCal V3 as a USB Thumb Drive to move/copy files to/from AutoCal V3. Use windows explorer to manage the files and folders. To ensure data integrity, eject the thumb drive from Windows Explorer before disconnecting the device.
What is the menu structure in AutoCal V3?
AutoCal V3 supports two menu structures; the EFILive standard menu and the user defined menu. Where a used defined menu is not installed, the EFILive standard menu will be displayed.
What is AutoCal folder?
The AutoCal folder structure is designed to accommodate different groups of files. The menu options you select on your keypad will reference files in these specific folder locations. The function of each folder is described below: