Full Answer
What size turbocharger do I need for my engine?
If you want to go nuts with power and shoot for 700 or more, an S400 style of turbocharger 71mm or larger has always been the go-to, and in order to install one on a 7.3, you’ll need to swap to an up-pipe with a larger T4 turbine flange. Irate Diesel makes a great bolt-on solution for those wanting to make the switch with their 7.3 T4 Mounting Kit.
What size turbo do I need for my sled?
For great street manners, an S369 works great, or for high RPM sled pull action, an S471 or larger can be used. Just be sure to size your turbo accordingly and match the airflow potential with the fuel capacity of your injectors.
What is the best turbo for a diesel engine?
The Turbo Thruster II from BD Diesel is a perfect choice for most builds. It’s a drop-in turbo which means no custom parts are required to make it work; it will bolt right in using your existing intake and exhaust components, but the big deal is it features a 66mm billet compressor wheel which will flow 40% more air than stock.
What is a T4 turbo system?
A complete T4 turbo system, such as the kit offered by Irate Diesel, rids the ’94.5-’97 engine of its low-set, T4 divided collector and raises it so that a turbo with a bigger compressor housing can clear the driver side valve cover. On Super Duty versions of the 7.3L, a T4 system replaces the factory V-band turbine inlet arrangement.
What size is a stock 2002 7.3 turbo?
Stock GTP38 Turbo Sizing (For Reference): 60mm Inducer.
What is the stock turbo on a 97 7.3 Powerstroke?
The factory turbo featured on the 94-97 Powerstrokes were originally manufactured by Garrett and featured a 1.15 A/R turbine housing.
How much boost can a stock 7.3 handle?
30-35 psi'94.5-'99 7.3L: 380 to 400rwhp Either charger can hold up to 30-35 psi of boost for a while, but 40 psi or more is asking a lot for a turbo that was originally intended to see a maximum of 17 to 23 psi.
How much HP can a stock 7.3 turbo handle?
The 7.3 Powerstroke is a two-valve behemoth which measures in at 444 cubic inches and has a maximum stock power rating of 275hp and 525lb. ft. of torque.
What size is a TP38 turbo?
The Comp Turbo TP38 utilizes a wheel similar to the Garrett GTP38R ball-bearing turbo (a popular turbo in the '991/2 to '03 7.3L segment), which has an inducer diameter of 66 mm, and an exducer diameter of 91 mm (bigger than the GTP38R's 88mm exducer).
What turbo is on a 1996 7.3 Powerstroke?
KC Turbos KC300x Stage 1 63/73 Turbo.
How much HP can a 7.3 make?
Ford's 7.3-Liter V-8 Can Make 600 Naturally-Aspirated Horsepower With Basic Mods. The giant gasoline V-8 in Ford's new Super Duty pickups can make huge naturally-aspirated power—and it can fit in a Fox-body Mustang.
How do you get the boost out of a stock 7.3 turbo?
3:5416:21Ford 7.3 Powerstroke Build More Boost For FREE!!! - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhich means you're not going to be building boost as quickly so quick and easy upgrade to do is toMoreWhich means you're not going to be building boost as quickly so quick and easy upgrade to do is to actually adjust this mechanism. So that it doesn't open up as early. Right.
What kind of turbo is on a 7.3 Powerstroke?
GTP38R turbocharger7.3L Power Stroke The GTP38R turbocharger contains an exclusive ball bearing cartridge for unbeatable response, efficiency, and durability. Elimination of thrust bearing eliminates Failures at elevated boost levels. The 88mm GT compressor wheel provides 33% more flow than the stock 80mm wheel.
What is the highest hp 7.3 Powerstroke?
2,180HP and 2,821 LB-FT With the aforementioned 15mm P-pump and the 4.4-inch turbo bolted in place, the engine belted out 2,180 hp (at 4,600 rpm) and 2,821 lb-ft of torque. As far as publicly release numbers are concerned, this makes their engine the most powerful 7.3L on record.
What size are stock 7.3 injectors?
approximately 90ccLet's start with the stock injectors. The 7.3 Powerstroke stock injector is just that, for stock truck performance. They are limited by the total fuel output. OBS injectors are rated at approximately 90cc of flow and they are single shot by design.
What is the most miles on a 7.3 Powerstroke?
Freeland, the owner of a 2000 Ford F-350 DRW 7.3L Power Stroke Diesel with 1.3 million miles! Freeland and his million-mile F-350 7.3L Power Stroke. Photo: T.
How much horsepower does a 1996 7.3 Powerstroke have?
215 horsepower1996. 1996 model year 7.3L Powerstroke-equipped Ford Trucks had higher performance specs than the previous model years. 1996 Ford Trucks with this Diesel engine offered 215 horsepower and 450 lb-ft of torque.
What is a 7.3 Powerstroke?
The 7.3 powerstroke is actually a Navistar T444E which is made by Navistar International, formerly International Harvester. In addition to Ford Super Duty trucks, the 7.3 is used in school buses, transit buses, and other large commercial vehicles.